PNNL awarded $3.3M to keep troops cool while using less fuel
January 24, 2013
Two projects to develop adsorption chiller and dehumidifying systems for military
RICHLAND, Wash. –
A new, energy-efficient air chilling system could keep troops on the front lines cool while using about half as much diesel as current systems. The system's decreased fuel consumption could also save lives by reducing attacks on American soldiers who deliver fuel to field operations.
The Department of Energy's Pacific Northwest National Laboratory will receive up to $2.8 million over three years to develop the system, the Department of Defense, Navy and DOE's Advanced Research Projects Agency-Energy, also known as ARPA-E, announced Wednesday. In another project led by ADMA Partners of Hudson, Ohio, PNNL will receive up to $500,000 to help develop an advanced membrane dehumidifier that allows air conditioning systems to operate more efficiently. The projects were among five awarded a total of $8.5 million to improve the efficiency of battlefield heating and air conditioning systems by 20 to 50 percent.
"PNNL is looking forward to adapting its ongoing research into advanced, energy-efficient cooling technologies and apply it toward important military needs," said PNNL Laboratory Fellow and project leader Pete McGrail. "Our team has a strong emotional connection to the success of this project, as it could help prevent American soldiers from being injured or killed while moving fuel in dangerous supply convoys around the battlefield."
PNNL is partnering with Oregon State University and Power Partners, Inc. of Athens, Ga. on the project.
PNNL's system will be a next-generation adsorption chiller that is specially designed to be smaller, lighter, more efficient and operate under the extreme temperatures experienced at bases on the frontlines, also called forward operations. The chiller will use a novel nanomaterial called a metal organic framework, or MOF. MOFs are crystal-like compounds made of metal clusters connected to organic molecules, or linkers. Together, the clusters and linkers assemble into porous 3D structures. PNNL developed a MOF that can hold up to three times more water than the silica gel used in today's adsorption chillers. This helps make PNNL's test adsorption chiller system much smaller and lighter. This project will build on advances in adsorption cooling technology PNNL has already made under ARPA-E's Building Energy Efficiency Through Innovative Thermodevices, or BEET-IT, program.
Further improvements for this project will include breakthroughs in microchannel heat exchanger technology and improvements in the MOF's thermal properties. Both advances will help reduce the size and weight of the chiller further and squeeze out more cooling efficiency.
"This will be the most advanced adsorption cooling system ever developed, and these advances are needed to meet very demanding military requirements," McGrail said.
PNNL's military system will run off of waste heat coming from a diesel generator. This could reduce the diesel fuel use needed to cool field military installations by up to 50 percent. The planned 3-kilowatt unit will weigh about 180 pounds and take up about 8 cubic feet.
PNNL will also work with ADMA and Texas A&M University to develop an energy-efficient, compact dehumidification and evaporative cooling system that removes water vapor from humid air. Direct evaporative cooling systems, sometimes called swamp coolers, don't work well with moisture-rich air. . To make evaporative cooling more efficient, this system will use a package of foil-like membranes made of a porous metal sheet coated with a layer of a water-attracting material called zeolite that removes water vapor from air. The resulting dehumidified air can be cooled with water recovered from the zeolite. The new system allows evaporative cooling to work in various climates with minimal water consumption. In hot, humid environments, the military estimates it could use 20 to 50 percent less fuel for cooling with this system. PNNL Chief Engineer Wei Liu is leading PNNL's contributions and is helping manage the overall project. The novel membrane dehumidifier is based on inventions made by Liu and his team at PNNL.
This isn't the first time the two systems have received support. PNNL began developing its MOF adsorption chiller for commercial buildings in 2010, when PNNL received ARPA-E funding for the BEET-IT program. PNNL also received ARPA-E funding in 2011 to adapt the adsorption chiller to heat and cool electric vehicles with minimal impact on driving distance. ADMA and PNNL's dehumidifier also received ARPA-E funding through the BEET-IT program in 2010.
This news release was modified on January 29, 2013, to include additional project funding and project scope.
Tags: Energy, Fundamental Science, Energy Efficiency, Energy Conservation, Chemistry, Nanoscience