Pagemaster: Sharon Johnson
The FEMIS product is being developed by the Pacific Northwest National Laboratory as part of the US Army's Chemical Stockpile Emergency Preparedness Program (CSEPP).
This software and its documentation were produced with Government support under Contract Number DE-AC06-76RLO-1830 awarded by the United States Department of Energy. The Government retains a paid-up non-exclusive, irrevocable worldwide license to reproduce, prepare derivative works, perform publicly and display publicly by or for the Government, including the right to distribute to other Government contractors.
This material was prepared as an account of work sponsored by an agency of the United States Government. Neither the United States Government nor the United States Department of Energy, nor Battelle Memorial Institute, nor any of their employees, MAKES ANY WARRANTY, EXPRESSED OR IMPLIED, OR ASSUMES ANY LEGAL LIABILITY OR RESPONSIBILITY FOR THE ACCURACY, COMPLETENESS, OR USEFULNESS OF ANY INFORMATION, APPARATUS, PRODUCT, SOFTWARE, OR PROCESS DISCLOSED, OR REPRESENTS THAT ITS USE WOULD NOT INFRINGE PRIVATELY OWNED RIGHTS.
References to any specific commercial product, process or service by trade name, trademark, manufacturer, or otherwise does not necessarily constitute or imply endorsement, recommendation, or favoring by the US Army or Battelle.
The software has not been reviewed for export out of the United States. A license or license exception may be required for export.
FEMIS integrates the following government-furnished software products.
D2PC (February 2000) US Army SBCCOM
PARDOS v3.1 (May 1997) US Army SBCCOM
Evacuation SIMulation Model (ESIM v2.1f1.3) Oak Ridge National Laboratory (ORNL)
Prepared for the CSEPP Office
United States Army Soldier and Biological Chemical Command
under a Related Services
Agreement
with the US Department of Energy
Contract DE-AC06-76RLO 1830
Pacific Northwest National Laboratory
Richland, Washington 99352
PNL-10689 Ver 1.4.7
| Last modified: 11/06/2001 Pagemaster: Sharon Johnson |
|